Saturday, July 5, 2014

Naperville Door Prize Project: 1 Missouri Pacific 1942 ACF 40-foot boxcar (2005 Naperville Gift)


One of the neat things about the Naperville Prototype Modelers meet were the "door prizes" provided every year by Sunshine Models (the company that founded and sponsored the meet).
Most of these consisted of a small sheet of resin parts (doors, ends, sills, sides, etc . . . ), a short instruction sheet, and decals if appropriate to convert a "stock" plastic kit into a different prototype. Most were boxcars, although there was a couple of hopper car conversions and even a complete CB&Q flatcar. In other years, it was a load of some type. One year we even got a set of coupler boxes and draft gear. 
I started building some of these when before we moved into this house, and put them aside when I started building the layout. Now, with the layout up and running I've been getting these "half done" projects off the "in progress" shelf and onto the layout. 
Missouri Pacific 1942 ACF 40-foot boxcar
2005 Naperville Gift
Here's a picture of the first of these door prize cars I built - a Missouri Pacific 40-foot, 10'-6" height boxcar. The basic car is an Intermountain Modified AAR boxcar kit - the Sunshine modification kit includes new doors, ends, and new sidesills. Here's some views of the car after I finished construction and before painting. 


I used very little of the "stock" Intermountain car for this project. I replaced the Intermountain underbody details with Detail Associates parts and wire piping - my rule for piping is "if it interferes with tracking, or can't be readily seen with the car on the track - leave it off." I bent my rule a little bit on this model, and added some additional piping from the triple valve that frankly, is invisible unless you flip the car over! I also replaced the Intermountain roof with a Red Caboose Murphy rectangular panel roof since I think the panels on the Red Caboose roof look better than the stock Intermountain part.  
Some of the other aftermarket parts can be seen in this view of the brake end. These include:

A-Line
Stirrup steps (these always outlast the styrene or Delrin ones!)
Plano:
Running board and brake platform - Plano
Kadee
Brake wheel
couplers
Detail Associates
Brake housing
Uncoupling levers
AB-brake set
Tack boards
Bracket grabs
Ladders
Grandt Line
Release valve
Intermountain
Body
Underframe
33" semi-scale wheelsets
Red Caboose
Murphy Rectangular Panel roof


The addition of the side sill was the trickiest part of this conversion. I glued it along the length of the Intermountain body (after removing the "tabs") but such a long butt joint was difficult to keep even. I need to do this same type of alteration with another of these conversions - I think I'll add a strip of styrene to the inside of the Intermountain sill that extends down enough to permit a gluing surface.
While not really "weathering" I added a painted over reweigh date that fits the era of my model railroad - often these patches didn't match the color of the car - they were also usually rolled on with little regard for making them square or too neat. I also added some chalk marks - these were done with Sunshine decals.
This one has been on the "in progress" shelf for a while. You might recall I had an issue with the clear acrylic finish (Testors) I used on this model - it dried streaky and white. I overcame that by applying a coat of Future floor polish. I blogged about that in this post. I followed that up this past week with some Tru-Color Flat finish. 
The car is ready for final weathering. But that will have to wait until next week. 



Friday, June 27, 2014

Tru-Color Paint - we have a winner!

My comments here are limited to airbrushing - I rarely, if ever airbrush things like structures and usually paint them by hand. 
Years ago my go-to paint for painting locomotives and rolling stock was a line of paint called "Accu-paint" from SMP Industries. (Not to be confused with the Accu Flex line of paints that eventually became "Modelflex"). 
I got started using Accu-paint since I modeled New England railroads and Accupaint made a line of decals with paints colored to match. But I found I always had great results with the stuff - it sprayed nice and fine, didn't spatter, gum up the airbrush, or dry with anything other than a smooth, shiny finish perfect for decals. 
A few months ago I stumbled across a bottle of Tru-Color paint at a train show. I'd heard of this paint but had never actually encountered it. "Oh great, more crappy paint" I said to the owner. 
"Try it and see what you think" was his reply. 
Last night I sprayed a car with the stuff - the paint performed beautifully, just like the old Accu-Paint (no surprise since they're essentially the same formula). 
I've used some acrylic paints - primarily the Vallejo brand - with good success as well. With some brands I always seem to get splattering and other issues. 
And no matter what I've tried I always seem to have issues with clear flat finishes from any acrylic paint manufacturer. 
I just tried the Tru-Color clear flat finish - it went on like a dream! 
Tru-Color has also introduced something Accu-paint never did - a line of flat weathering colors. I'm going to try those once I get through tomorrow's operating session. 
I'll post photos later. 
And since someone will inevitably post a comment about solvent-vs-acrylic paints and safety issues I'll add common sense applies. When you're airbrushing anything - including acrylics - you should be using a vented booth and ideally wear a two-stage respirator, gloves, and eye protection. 

Thursday, June 26, 2014

The many locales of Williams Creek

Seeing the overview of the entire peninsula from the post on Saturday's op session has received several nice comments... "layout is looking great," "glad to see it coming together" and the like. What I see is all the effort, time and money it's taken to get from "there to here."
The expense and time building a helix, second level, and a laying a lot more track. The wasted effort of doing, and then tearing out backdrops, scenery and the like.
It seems kind of strange that I kept one scene - the Williams Creek crossing, intact through all these changes. The labels show how this section of the layout, about 20" x 48" overall, started on the upper level, then moved straight down about 15" when the layout was single-decked. Finally, the addition of the longer siding at Randolph meant the bridge came out. As I related in a series of posts back in March and April, the bridge scene sat on a shelf in the storage room and more than once almost went to the curb. In the end Williams Creek has come to rest in his present location and there are no plans to move it anytime soon.
I really need to accept that the track plan, area for buildings, scenery, etc... will never be ideal. Instead I have to move forward and finish some other portion of the railroad. I'm planning for that to be Waterbury - but you never know.
Stay tuned.

Monday, June 23, 2014

Operating Session #4 - June 21, 2014

Operating Session #4 on Saturday June 22, 2014. Started at 0900 with victory being declared (and lunch served) at 1252....One of my visiting operators, Wayland Moore, took photos - a good thing since I didn't! Thanks Wayland!
Mat Thompson stepped in to take Bob Warren's normal place in the dispatcher's chair.
Randolph made its operating debut. Note the "spare" locomotives in the background.
All in all, session went well. A few trackwork gremlins hid until visiting operators were present, and one feeder wire connection came undone which rendered a section of the mainline dead for a time while the Section Foreman (me) tracked the problem, failed to find it, and ran an over-table temporary jumper to get the trains moving again.
I had fun and the guest operators enjoyed themselves (or so they claim). We will finish the operating "day" next week with a different crew - it will be interesting to see if they can recover from some of the issues "earlier in the morning" since the cascading effect of the mainline shutdown is most certainly showing itself in the on-time performance....
Post session I spent some time getting another of the 2-8-0s up and running - and reprogrammed the steamers on the layout so the brake squeal is turned way, way, down.
A few granuales of ballast found their way into the turnout going to the creamery, which caused some issues. I got those cleared out so hopefully that problem is fixed.
Roger is asking two guys who clearly don't know the answer "Which track is this?"
Answer: I forgot to tape the Randolph track diagram to the fascia....sorry.

Paul Dolkos and Steve Williams try to
decide what to do next.


Steve and his conductor on a northbound.




Paul gets ready to depart St Albans (north staging) while Molly makes
sure no one gets out of the aisle without petting her.


Lunch! the best part of any session. Thanks  to Christine for the delicious BBQ and potato salad!
Rain held off long enough for us to enjoy lunch on the deck.


Interesting angle shows the current state of the peninsula "blob."
Need to tweak some track issues in Essex this week prior to our next session on the 28th. I might end up replacing Essex with something much simpler since it's a little jammed in. But this town does add a great deal of operating interest.
 The Essex operator left several little notes on track issues in Essex Jct - I need to resolve those before next week's session. I might (and emphasize might) make some radical simplifications to the track in that section of the layout - one possibility is removing Essex Jct from that section of the railroad and replacing it with a much simpler town of Richmond, Vt. I just think there's a little too much jammed into Essex - something that's becoming more obvious as I try to fit buildings between the various sidings. I'd lose the Essex switcher position if I did that, but Essex Jct might return on the currently empty wall of the basement beyond the current north end staging yard. 
As an aside, if I do change out the Essex scene the remaining styrofoam subroadbed will be replaced with plywood on that side of the peninsula.
Another lesson learned was I need to be a little more specific in some of the train card instructions - I will try and beef those up a little before next Saturday.

Sunday, June 15, 2014

Work Session Report - 15 June 2014

Tom, John, and Ben stopped by a short work session this afternoon. 
About a year ago John made a yardmasters desk for White River Junction - he and Tom worked on installing it on the layout. John is an extremely talented modeler - his other hobby is making mandolins - so to say he went above and beyond the call with the YM's desk is an understatement!
But the finished desk looks great, and it's on drawer glides so it can be slid out of the way to keep the aisle clear when it's not needed. 
Tom and I spent some time discussing the station platforms and B&M track arrangements by White River Junction station. We have a plan for the area that will maximize the platform area around the station building and make the finished scene close to full size in HO. It's going to have to wait until after the operating sessions in the next two weeks. 

Ben worked on passenger car wheel sets. 
I did a couple of minor little tasks - adding another set of feeders near the creamery crossing and ballasting some of the mainline track. 
I also finished installing the phone system that Mat and Pete stopped by to help with on Tuesday night. The phone system deserves it's own post. 
Thanks to all for the help!
As for me, now I have to clean up the layout room and get things staged for the session next Saturday.