Wordless Wednesday #278

 

CV Shops St. Albans, CV Photo, CVRHS Collection

Wordless Wednesday #277

 

Mill stream progress and filling gaps

As mentioned in my previous blog post I needed to fill the gap in the surface of the mill stream. Turns out a piece of Gatorboard that I had lying around was the right overall size - some quick work with a hobby knife trimmed it to fit the oddball shape of the opening. This was secured in place with a healthy bead of hot glue. One side of the building has a door and windows on the lower floor so I needed to have some open ground on that side of the structure. I cut more Gatorboard and added some Chooch cut stone material. The photo shows it being rough fit in place. 

Next, I cut a thin piece of foamboard to raise the mill building slightly above the water surface. Actually, it made the bottom of the building just about even with the "water" level. 

When I added the fascia the "Upper Road" (former roadbed on the Northern SNE) ended up with a gaping hole between the fascia and the plywood subroadbed. I trimmed several pieces of pink foamboard and used them to fill the gap. 

Putting the mill stream back together - and a farewell too soon

 After a couple of weeks of not wanting to do anything having to do with model railroading (see below) I forced myself down to the basement this weekend. After about 45 minutes of "puttering" - defined as wandering about the basement trying to figure out exactly what to do - I settled on trying to plant a structure I salvaged from my previous layout into the new river/mill scene. I have plans for another mill building alongside the upper mill pond but wanted another element between the two falls and this old BEST kit seemed to fit the bill. 

Of course the first step was excavating the plywood and foam I'd installed a few weeks ago to make room for the structure. The result was a cavernous hole in the earth - which I promptly filled and patched with a "box" made from Gatorboard hot glued in place to the underside of the layout. The lead photo in this post shows how the building will fit into the scene. 

When the building was pried out of my old layout there was some plaster and other scenery materials that got stuck on the foundation blocks - and some of the blocks popped out. I replaced those blocks, soaked the leftover plaster with alcohol for about 10 minutes and carefully scraped it off the surface. 

I never really liked the coloration of these block so I took the opportunity to repaint them with a variety of Vallejo shades of gray and earth-tone paints. And it looks like some scenery material got on the clapboard siding at some point - I'll do something to cover that up or minimize it. 

Farewell Too Soon

Almost two years after loosing our Basset Hound Beau we once again had to say goodbye - this time to his sister Molly. You'd think this would get easier - but it never does. When we adopted these two clowns we thought Beau was the outgoing one and Molly didn't really have much of a personality. Boy were we wrong! Molly was an endless source of amusement and truly brought joy to our lives for almost 16 years. And, like her brother, she was truly a perfect dog. They never destroyed anything, obeyed every time we told them to do something, and greeted everybody who came through the door with a mixture of unabashed joy and unbridled enthusiasm! 

The photo above of Molly was taken the day our new furniture was delivered to the new house. The movers unwrapped the plastic from the ottoman and within seconds Molly decided this was her new throne. And it remained so until a year or so ago when her legs were just too weak and stiff for her to jump up there. 

When my dad was sick we made a lot of road trips to South Carolina - here's Molly on one of those trips. One stop to stretch her legs between Virginia and SC - and then she'd sleep the rest of the way. 

She was, and always will be, our sweet princess. Rest easy girl until we meet again. 

A New Addition to the Layout - Part IX: An upper mill pond

When we removed the Charlton Branch section from Jason's layout we had to cut through the river. Although it went pretty well, the water did chip slightly and a couple of "chunks" of scenery separated from the subbase. I suppose I could have tried to blend it and add a new layer of Envirotex to blend everything together, but I wasn't sure that would even work and if it didn't work I was concerned it would mess up the remaining section of river and falls near Martin Machine that was in good shape. 

A logical - and easier - solution is to not try to patch the river but instead add another fall and a mill pond at a higher elevation. This has the added advantage of allowing for another mill building/complex. 

I did some rough measurements the other night and mocked things up. That seemed to go well enough that last nights "30 minutes a night" was spent cutting a mill pond surface (the leftover fascia piece - hence the color!) and the "land" - currently some 1" pink foam. 

Wordless Wednesday #276

 

Wordless Wednesday #275 ... Decisions, Decisions